莱芜力科塑料机械有限公司（http://www.likesuji.com/）作为一个成功企业，告诉我们：若不能从根本着手，奢谈企业管理是没有用的。管理没有秘诀，只看肯不肯努力下功夫，凡事求其合理化，企业经营管理的理念应是追根究底，止于至善。
     Eli Rico Plastic Machinery Co., Ltd.  as a successful enterprise, tell us: if you cannot proceed from the fundamental, talk about enterprise management is of no use. Management is no secret, just not working hard, always seeking the rational, the enterprise management concept should be inquisitive, aim at absolute perfection.
     花纹下吹水龙带生产线是由我公司多名专业人员采用拥有现代化的技术手段制造而成，下面我们来了解下微喷带机的安装步骤：
Pattern blowing hose production line is composed of more than professional personnel of our company with manufacturing technology has modernized and become, below we come to understand the micro injection machine installation steps:
　　1、将外牙四通与喷带连接球阀配套装上，每2个球阀搭配1个外牙四通。
1, the outer teeth four and spray with connecting valve supporting mount, each of the 2 ball valve with 1 outer teeth four.
　　2、排放好PVC管道及相关配件。
2, emissions of PVC pipeline and related accessories.
　　3、将管道插口、管道配件承口用布擦拭干净，均匀涂刷PVC胶合剂；对准方向插进，管道配件旋转1/4圈；再将在承口残留的胶合剂擦净。粘接好后的管道静置接口固化为止。
3, the pipeline, pipe fittings socket socket wipe clean with a cloth, even brushing PVC adhesive; the alignment direction is inserted into the rotating 1/4 ring, pipe fittings; then the residue in the socket adhesive wipe. Pipeline static interface adhesive after curing.
　　4、将装上球阀的外牙四通按照农作物垄向，约每4米1套。
4, will be installed on the valve of the outer tooth four according to crop ridge, approximately every 4 m of 1 sets.
　　5、外牙四通与管道粘接。
5, external teeth four and pipe sticking.
　　6、粘接好所有PVC管道6小时后，可开机通水，把管道里面的泥沙与杂质排清，粘接上堵头。冲洗时应由上至下逐级进行，支管和阀门应按顺序冲洗。
6, the bonding all PVC pipe after 6 hours, running water, sediment and impurities pipeline inside cleared, bonding plug. Rinse should be from top to bottom step by step, pipe and valve should be according to the order of flushing.
　　7、最后安装微喷带，微喷带一端接上微喷带连接球阀，另一端顺着作物垄向展开，喷孔向上，未端用软绳扎住。
7, the final installation thin-soft spray tape, mini-spraying belt is connected on the mini-spraying belt connected ball valve, the other end along the ridge direction expansion nozzle crops, upward, with a rope tied the end.
    花纹下吹水龙带生产线给我们的生产带了很多便利，得到了大范围的推广使用，主要生产LLDPE浇地管灌溉用水管，更换机头可生产方便袋或600以内的其它软管制品及微膜。本机组结构简单占地面积小，操作使用方便，易于维护。采用普通卧式电机价格更低廉，选用自动温控装置充分节省人工。
Pattern blowing hose production line for our production brought a lot of convenience, has been promoting the use of a wide range of irrigation water pipe, mainly the production of LLDPE irrigation, replacing the head can produce the convenient bag or within the 600 other hose products and micro membrane. This unit with simple structure has the advantages of small occupation area, convenient operation, easy maintenance. The ordinary horizontal machine cheaper, with automatic temperature control device which saves manual.